The gantry machining center refers to the machining center in which the axis of the main shaft and the table are set straight. It is especially suitable for machining large workpieces and workpieces with complex shapes. So what are the requirements for the operation of the gantry machining center?

1. The operator should be familiar with and master the performance and characteristics of the gantry machining center machine. To ensure that the emergency stop switch can quickly and effectively play a role in emergency situations to avoid injury accidents.

2. Wear work protective equipment as required, and it is forbidden to operate with gloves.

3. When the device is working, do not touch the electronic switch with wet hands to avoid electric shock. Do not touch any moving parts with your hands.

4. Do not place objects or non-machined workpieces on gantry machining centers or moving objects.

5. The computer desk or work table next to the machine must be sturdy and not placed on moving parts.

6. When loading and unloading the workpiece, the machine should be stopped first, and attention should be paid to maintaining an appropriate distance between the workpiece and the tool. When the machine is running, do not open the front door and the left and right protective covers arbitrarily to avoid personal injury.

7. After the tool is set, please run it with DRY RUN to make sure the program is correct.

8. When the power supply is cut off or urgently suspended, the three axes should be restored to their original mechanical positions when the machine is turned off.

9. Do not remove the travel switch or any related parts of the maintenance switch without ization.

10. Before leaving the machine after finishing the work, the control power switch of the operation panel and the main switch of the electrical box should be closed.